Free and Trial Programs
| Description | Filename | Size | ||
| MacRegIO | ||||
| MacRegIO program. Can be used for direct communcation with MAC50-800 motors | MacRegIO_v1_28.zip | 607Kb | ||
| MacComm OCX | ||||
| MacComm OCX 1.07 Trial. Can be used as a communication layer between your application and MAC motor(s). (30 day trial) | MacComm OCX 1.07 Trial.zip | 1241Kb | ||
| CANOpenExplorer | ||||
|
CANopenExplorer version 2.2. is a program that was developed for internal use only, but the program has features that are nice to have, and make it more easy to start up the MAC motor when this is equipped with a MAC00-FC2/4 module, or when the SMC75 is running with CANopen fieldbus interface communication. The program can write/send SDOs, PDOs and heartbeat messages, and can read EDS files.
The EDS files for MAC00-FC2/4 and the SMC75 can be downloa-
ded from the Fieldbus Interface Specification Files menu. To learn more about CANopenExplorer, see section 4.3.16 in the user manual for MAC050-141 and MAC800, or see in the user manual for Quick Step Integrated Stepper motors.
When the program is being downloaded, it must be saved on the PC, and the user has to make a CANopenExplorer directory to the program. |
CANopenExplorer V2.2 | 416Kb | ||
| MacTalk | ||||
| MacTalk : Setup and monitor program for the MAC and MIS motors.
Please notice that this is not a free ware program. Please contact your nearest JVL representative for further information.
Notice for owners of MacTalk: MacTalk can be updated to the newest version from the MacTalk program. |
||||
| Motoware | ||||
| MotoWare : Setup and monitor program for the AMC, SMC and SMI controllers.
Please notice that this is not a free ware program. Please contact your nearest JVL representative for further information. |
||||
| USB-driver for MAC00-B41 | ||||
|
Window 7, Vista and XP USB-driver for MAC00-B41. Normally Windows 7 will install a driver automatically which works fine - but it might need a reboot. In case it does not work automatically, the following driver installation file can be used. It has been tested on Windows 7, 32-bit & 64-bit, and works. |
USB-driver-for-B41 | 8.3 Mb | ||
| RS232 | ||||
|
ATC-810A USB-driver for Windows 7. This driver is needed for the USB to RS232 converter if you are using Windows 7. |
USB-driver-for-ATC-810A | 2.26 Mb | ||
| RS485 | ||||
| Driver ATC-820 USB to RS-485 | Driver_ATC-820.zip | 1.300Mb | ||
| Driver ATC-820 USB to RS-485 for Windows 7 | WIN7 - Driver_ATC-820.zip | 2.175Mb | ||
JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
