top
Please keyin username and password:
Forgot your password
Seite drucken  Zu Favoriten  Seite als E-Mail versenden 
 
 
 

Stepper Motor Controller SMC20

Stepper Motor Controller type SMC20 is a low-cost controller for step motors.
SMC20 has ½Kb of memory and can either be used as a stationary unit or connected to a terminal or a PC via an RS232C/V24 interface. Programming is very simple using JVL´s programming software, MotoWare.
The Controller includes a built-in driver which can supply up to 2.5 Amp. per motor phase. It has 3 digital inputs and 3 digital outputs as well as 6 analogue inputs.
The motor driver is short-circuit protected. Motor current is disconnected in the event of a short-circuit.
 
  • Power supply 15-45VDC
  • RS232C/V24 communication.
  • Simple programming.
  • Max. operating frequency 15kHz.
  • RS232 interface bus.
  • Connection of up to 7 controllers on the same RS232 interface bus
  • Baud rate of 110 - 9600.
  • Small physical dimensions: h34 x w100 x l160 mm
  • Thermal protection.
  • 3 User inputs. 6 Analogue inputs.
  • 1 Stop input. 3 User outputs.
  • Connection via DIN41612 connector
 

 
 
 
 
 
 
 
 
 
 
DETAILED
 
 
 
DOWNLOAD
 
 
 


JVL A/S Deutschland Moltkestr. 24 DE-72762 Reutlingen Deutschland
Tel: +49 7121 1377260 Fax: +49 7121 1377317 E-mail: sales@jvl.dk
Copyright © JVL A/S - All Rights Reserved.

SEO & CMS System.


HTML5 | CSS3