top
Please keyin username and password:
Forgot your password
Seite drucken  Zu Favoriten  Seite als E-Mail versenden 
 
 
 

Webinars

Webinar

 
 
 
 
 
 
JVL has planned several webinars for the next months.
If you want to join one of these then check and sign-up here:
 
Go to: Webinars soon coming
Go to: Webinars already held
Go to: Webinars in the future
 
Go to: The possibilty for special courses or training
 
Description - Webinars soon coming
Date / Sign-up
Video
PPNB 2.0 - Product Part Number Builder
x. of Month 2023
-
* Description - Webinars already held
Date / Sign-up
Video
MIS together with HMI
4. of October 2022
Video
-
Program
Stepper VS Servo - Pros and cons presented in this epic motor type battle
JVL produces both Servo and stepper motors, and with the introductions of our market leading ServoStep motors, you might wonder: "Why not just build one motor?"
The answer is not that simple. Servo motors and step motors still have each their own strengths and weaknesses, which we will go through in this webinar.
Kenneth and Palle will each present a motor type, and Alexander will present applications where Kenneth and Palle will compete to win the most applications for their motor type.
In the end, we will present the score board, and give a clear overview of each motor types advantages and disadvantages.
14. of June 2022
Video
-
PDF
DMX512 for all JVL motors
DMX is available in all JVL motors, both servo and stepper.
In this webinar we will go through how to use DMX on our integrated motors, how to set it up, and the basics about DMX and why it is a great protocol for many applications.
DMX512 are mostly used for applications in stage lighting, special effects and theaters and can fast and efficiently control up to 512 motors from the same DMX master.
 
See more about DMX for JVL motors here: <Link>
3. of May 2022
Video
-
PDF
MotorSizer 4.0
A new version of MotorSizer is soon available and ready for introduction.
It calculate and show the combinations of motor and gear that can run the application according to your specifications.
 
Try the new MotorSizer 4.0 here: <Link>
22. of March 2022
Video
-
PDF
Function Blocks for Profinet - How to use with JVL motor - DE
In this webinar, our Siemens expert Christian Peitzmeyer will show you how to setup your PLC to control your integrated JVL motor using our Function Blocks for Profinet. The setup will be done using Siemens TIA Portal.
 
Our German area sales manager Jan Tausend will present the webinar and go over the key selling points.
 
The webinar will be in German.
 
Get the latest Function Blocks including example program here: <Link>
16. of March 2022
Video
JVL News - new products, new functions
We have a lot of fantastic news that we would like to share with you.
We were all really bummed that we did not get to meet you at SPS this year, but now we would like to present the news live to you, and allow you to ask questions in our webinar this December.
We really look forward to see you.
14. of December 2021
Video
My first JVL motor
You just received your first integrated JVL motor - yay!
In this episode Alexander will connect a brand new JVL motor for the first time, install MacTalk and go through the basics of how to use your new motor.
Link for programs used in this webinar - MIS: Prog-1013, -1014 and -1015 - Link
9. of November 2021
Video
CiA-402 for MIS and with CanExplorer
Our Development engineer Rune will demonstrate the new
CiA-402 support in our MIS motors, and go over a full setup
with our own test software CanExplorer.
30. of June 2021
Video
New Integrated Spindle Drives for format change and setup axis.
Why automat format change by exchanging handwheels with
spindle drives?
Introduction to standard MIS ServoStep Motors by Kenneth and Palle.
New spindle drive version targeted format change applications
- Features and benefits.
Add On instruction for Studio 5000 (Allen Bradley / Rockwell Automation).
Function Blocks for Tia Portal (Siemens).
Product codes
Q/A session
23. of June 2021
Video
World's Best Closed-Loop for Stepper Motors
Our sales engineer Palle and Alexander will explain all the benefits, and
special advantages of the JVL Closed Loop function for integrated
ServoStep™ motors, and why we are the top of the world!
16. of June 2021
Video
Easy Programming - with JVL ePLC
A guide tour through our integrated PLC - ePLC - Integrated in all our
integrated motors (MAC and MIS) and stand-alone controllers -
(SMC66 + SMC85) with Alexander.
I will guide you through the basics, and then I will go over the
tasks I normally use for the JVL trainings.
24. of February 2021
Video
MACmotor® tuning
A guided tour through the integration and tuning of a JVL MAC motor.
Peter will take you through all the adjustment possibilities,
and teach you all the basics which is needed for optimizing
your motor for your application.
27. of January 2021
Video
ServoStepTM (MIS) tuning
Today Alexander will show you how to tune a stepper motor.
We also use the scope to verify that the tuning is correct.
We also go through special closed loop parameters.
20. of January 2021
Video
New MacTalk and new MAC + MIS firmware
Walk-through MacTalk and presentation of the new MAC+MIS firmware.
Alexander take the time needed to give you a proper introduction to MacTalk.
9. of December 2020
Video
 
 
 
* Description - Future Webinars
Date / Sign-up
Video
General functions - All the cool stuff that makes JVL #1
xx. of xxxx 20xx
-
Functionblocks for Siemens
xx. of xxxx 20xx
-
AOI for Rockwell- How to use with your JVL Integrated motor
In this webinar, our Rockwell experts Hakim and Kenneth will show you how to setup your PLC to control your integrated JVL motor using our AOI's (Add On Instructions) for Rockwell environment.
 
Get the latest AOI's here: https://www.jvl.dk/1189/addon-instructions
xx. of xxxx 20xx
-
 
* Courses:
 
JVL also makes courses for different subjects if requested.


JVL A/S Deutschland Moltkestr. 24 DE-72762 Reutlingen Deutschland
Tel: +49 7121 1377260 Fax: +49 7121 1377317 E-mail: sales@jvl.dk
Copyright © JVL A/S - All Rights Reserved.

SEO & CMS System.


HTML5 | CSS3